RG-AP820-L(V3), Wi-Fi 6 AX3000 Indoor AP  Indoor scenarios for higher education, government, general education, finance, and business sectors. Highlight Features

• 2.5 Gbps SFP Port, Multi-Gigabit Networking
• Next-generation AX3000 chip, supporting 160 MHz 2.976 Gbps
• Next-generation Wi-Fi 6 technology, higher concurrency, lower latency
• Unified cloud management, intelligent tuning, easy O&M

  Ultimat e Speed and Capacity with Wi-Fi 6, Up To 2.976 Gbpss    Hardware Specifications Dimension s and Weight RG-AP820-L(V3) Unit dimensions(W x D x H) 220 mm x 220 mm x 49 mm (8.66 in. x 8.66 in. x 1.93 in. )Shipping dimensions(W x D x H) 514 mm x 326 mm x 292 mm (20.24 in. x 12.83 in. x 11.50 in. )Unit weight Main unit: 0.6 kg (1.32 lbs)Mounting bracket: 0.2 kg (0.44 lbs)Shipping weight 8.46 kg (18.65 lbs)Mounting Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)Lock option Kensington lock and securing latch  Wi-Fi Radio RG-AP820-L(V3) Radio design Dual-radio and up to four spatial streams:● Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMOOperating frequencies Radio 1,  802.11b/g/n/ax:● 2.400 GHz to 2.4835 GHz, ISMRadio 2,  802.11a/n/ac/ax: ● 5.150 GHz to 5.250 GHz, U-NII-1● 5.250 GHz to 5.350 GHz, U-NII-2A● 5.470 GHz to 5.725 GHz, U-NII-2C● 5.725 GHz to 5.850 GHz, U-NII-3/ISM Country-speci fic restrictions apply:EgyptRadio 1: 802.11b/g/n: 2.400 GHz to 2.4835 GHzRadio 2: 802.11a/n/ac: 5.150 GHz to 5.350 GHzData rates Combined peak data rate: 2.976 Gbps2.4 GHz radio● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum)● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)5 GHz radio● Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (maximum)● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)Data rate set The following 802.11-compliant data rates in Mbps are supported:2.4 GHz radio● 802.11b: 1, 2, 5.5, 11● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)5 GHz radio● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)● 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)● 802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)Packet aggregation 802.11n/ac/ax: A-MPDU and A-MSDUAntenna type Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)Antenna gain 2.4 GHz: 5 dBi5 GHz: 5 dBiMaximum transmit power 2.4 GHz radio: 26 dBm (23 dBm per chain)5 GHz radio: 26 dBm (23 dBm per chain)  Thailand < /p>2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm5.470 GHz to 5.725 GHz, EIRP ≤ 30 dBm5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm

 Egypt2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBmPower increment Configurable in increments of 1 dBmRadio technologies 802.11b: Direct-Sequence Spread-Spectrum (DSSS)802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)Modulation types 802.11b: BPSK,  QPSK,  CCK802.11a/g/n: BPSK,  QPSK,  16-QAM,  64-QAM802.11ac: BPSK,  QPSK,  16-QAM,  64-QAM, 256-QAM802.11ax: BPSK,  QPSK,  16-QAM,  64-QAM,  256-QAM,  1024-QAM The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation. Wi-Fi Radio Frequency Performance RG-AP820-L(V3) Frequency Band and Protocol Data Rate Maximum Transmit Power per Transmit Chain Maximum Receive Sensitivity per Receive Chain2.4 GHz 802.11b 1 Mbps 23 dBm -91 dBm2 Mbps 23 dBm -91 dBm5.5 Mbps 23 dBm -90 dBm11 Mbps 23 dBm -87 dBm2.4 GHz 802.11g 6 Mbps 23 dBm -89 dBm24 Mbps 22 dBm -82 dBm36 Mbps 22 dBm -78 dBm54 Mbps 20 dBm -72 dBm2.4 GHz 802.11n (HT20) MCS0 23 dBm -85dBmMCS7 19 dBm -67 dBm2.4 GHz 802.11n (HT40) MCS0 23 dBm -82 dBmMCS7 19 dBm -64 dBm2.4 GHz 802.11ax (HE20) MCS0 23 dBm -85 dBmMCS11 15 dBm -58 dBm2.4 GHz 802.11ax (HE40) MCS0 23 dBm -82 dBmMCS11 15 dBm -54 dBm5 GHz 802.11a 6 Mbps 23 dBm -89 dBm24 Mbps 22 dBm -82 dBm36 Mbps 22 dBm -78 dBm54 Mbps 20 dBm -72 dBm5 GHz 802.11n (HT20) MCS0 23 dBm -85 dBmMCS7 19 dBm -67 dBm5 GHz 802.11n (HT40) MCS0 23 dBm -82 dBmMCS7 19 dBm -64 dBm5 GHz 802.11ac (VHT20) MCS0 23 dBm -85 dBmMCS9 18 dBm -60 dBm5 GHz 802.11ac (VHT40) MCS0 23 dBm -82 dBmMCS9 18 dBm -57 dBm5 GHz 802.11ac (VHT80) MCS0 23 dBm -79 dBmMCS9 18 dBm -53 dBm5 GHz 802.11ax (HE20) MCS0 23 dBm -85 dBmMCS11 16 dBm -58 dBm5 GHz 802.11ax (HE40) MCS0 23 dBm -82 dBmMCS11 16 dBm -54 dBm5 GHz 802.11ax (HE80) MCS0 23 dBm -79 dBmMCS11 16 dBm -52 dBm5 GHz 802.11ax (HE160) MCS0 23 dBm -77 dBmMCS11 16 dBm -50 dBm  Bluetooth Radio RG-AP820-L(V3) Bluetooth Bluetooth 5.1Antenna type Onboard omnidirectional antennaMaximum antenna gain 2.4 dBi, with a downtilt angle of roughly 30 degreesMaximum transmit power 17 dBm (GFSK)14 dBm (π/4-DQPSK,  8-DPSK)Receive sensitivity –95.5 dBm (DH5)–95 dBm (π/4-DQPSK)–87.5 dBm (8-DPSK) 
  Ports Specifications RG-AP820-L(V3) Fixed service port 1 x 10/100/1000BASE-T port● In compliance with IEEE 802.3af standard (PoE)● Auto MDI/MDIX crossover● PoE-PD:  54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)● 802.3az EEE1 x 2.5GE SFP/RJ45 combo port, compatibility with 1GE module, shared with one 10/100/1000BASE-T portFixed management port 1 x RJ45 console port (serial console port)Status LED 1 x multi-color system status LEDButton 1 x Reset button● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings. Note：A combo port consists of an optical Ethernet port and an electrical Ethernet port on the panel and can be used as the optical or electrical port at one time. When either of the Ethernet ports is working, the other port is automatically shut down. You can select a port type as required.   Power Supply and Consumption RG-AP820-L(V3) Input power supply The AP supports the following two power supply modes:● 48 V DC/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately. ● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE). Note:● If both DC power and PoE are available, DC power is preferred. Overall power consumption Maximum power consumption: 12.95 W● DC powered: 12.95 W● PoE powered (802.3af): 12.95 W● PoE+ powered (802.3at): 12.95 W● PoE++ powered (802.3bt): 12.95 W● Idle mode: 6 W Note：When the 2.5GE SFP port of the RG-AP820-L(V3) is used as an uplink port, the port supports PoE or DC power supply. When PoE is adopted, the auto-negotiation Ethernet port (LAN/1G/PoE) serves as a PoE-in port only.   Environment and Reliability RG-AP820-L(V3) Temperatu re Operating temperature: –10°C to +50°C (14°F to +122°F)Storage temperature: –40°C to +70°C (–40°F to +158°F)Note: At an altitude in the range of 3,000–5,000 m (9,842. 52–16,404. 20 ft. ), every time the altitude increases by 220 m (722 ft), the maximum temperature decreases by 1°C (1.8°F). IP rating IP41Humidity Operating humidity: 0% RH to 95% RH (non-condensing)Storage humidity: 0% RH to 95% RH (non-condensing)Mean Time Between Failure (MTBF) 200,000 hours (22 years) at the operating temperature of 25°C (77°F) 
  Regulatory Compliance RG-AP820-L(V3) Security regulations IEC 62368-1EN 62368-1EMC regulations EN 55032EN 55035EN IEC 61000-3-2EN 61000-3-3EN 301 489-1EN 301 489-3EN 301 489-17Radio frequency regulations EN 300 328EN 301 893EN 300 440EN IEC 62311FCC Part 15 *For more country-specific regulatory information and approvals, contact your local sales agency.   Software Specifications Applicabl e Software Version RG-AP820-L(V3) Applicabl e software version RGOS11.9(6)W1B4 or higher  WLAN RG-AP820-L(V3) Recommend ed maximum number of active devices per AP 120Maximum number of associated clients 256 NoteThe number of associated clients varies according to the environment. Maximum number of BSSIDs 32 (up to 16 BSSIDs per radio)STA management SSID hidingEach SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.  Remote intelligent perception technology (RIPT)Intelligent client identification technologyIntelligent load balancing based on the STA quantity or trafficSTA limiting SSID-based STA limitingRadio-based STA limitingBandwidth limiting STA/SSID/AP-based rate limitingWireless roaming Layer 2 and Layer 3 roamingBridge Vlan SupportedWireless Distribution System (WDS) Supported  Security RG-AP820-L(V3) Authentic ation and encryption Remote Authentication Dial-In User Service (RADIUS)PPSK, UPSK (used with AC) , web, 802.1X, WPA, WPA2, and WPA3 authenticationSMS authentication (used with the RG-WS series wireless access controller)MAB authentication (used with the RG-WS series wireless access controller)WEP (64/128 bits), WPA-Personal, WPA-Enterprise,  WPA2/WPA3(AES),  WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE, WPA3-OWE transition modeData frame filtering Allowlist, static blocklist, and dynamic blocklistACL Dynamic ACL assignmentCPP SupportedNFPP Supported  Routing and Switching RG-AP820-L(V3) IP servi ce Static IPv4 addressIPv4 DHCP ClientFTP ALG and DNS ALGMulticast Multicast-to-unicast conversionIPv6 basics IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 PingIPv6 DHCP ClientIP routing IPv4/IPv6 static routingVPN PPPoE ClientIPsec VPNLLDP LLDPLLDP-MEDLLDP-PoE

  Management RG-AP820-L(V3) Network management Fault inspection and alarmInformation statistics and loggingSNMPv1/v2c/v3NTP Server and NTP ClientNetwork management platform Ruijie CloudWeb-based management (Eweb)User access management Console, Telnet,  SSH,  SNMP and TFTP-based managementFat/Fit/Cloud mode switchover When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet. When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Продукт известен още и като RG AP 820 L AX 3000 V 3, RGAP820LAX3000V3, RG AP820 L AX3000 V3, RG-AP820-LAX3000V3, RG AP820-L AX3000 V3, RG-AP820-L AX 3000 V 3